Scantronic 808 Betriebsanweisung PDF herunterladen (Seite 22)

Administration

Page 20

Remote controls

A remote control is a transmitter that you can attach to a keyring.

The remote control has four buttons and a small LED that glows

when it transmits a signal. When delivered from the factory three

of the buttons are dedicated to setting or unsetting the system

(see Figure 4).

1. Full Set.

2. Part Set.

3. Not used.

4. Unset.

5. Transmit LED.

Figure 4. Remote control Buttons.

You may allocate one (and only one) remote control to each user.

To allocate a remote control to a user, select Users - Edit User -

User(nn) - Remotes.

Note: If the user already has a remote control allocated to them

then the screen will display “Delete Remote?”. See page

21.

The display asks you to press one of the buttons on the remote

control.

1. Press any button on the remote control that you wish to

When you press the button the control unit learns the

identity of the remote control and registers it to the user.

If you do not wish to register a remote control press X.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

Scantronic 808 Betriebsanweisung Seite 22