Scantronic 9800+ Bedienungsanleitung PDF herunterladen (Seite 6)

Ensure that all doors and windows are secure, check that movement

detectors are not obstructed and proceed as follows:

when final door is closed or on expiry of exit timer, or, where applicable, on

locking the final door, or pressing the exit terminator.

The alarm system will normally set after satisfactory completion of the

setting procedure and on closing the final door on exit. However, where the

user is remaining on the premises with the alarm set, the system will

automatically set on expiry of the exit timer.

In some installations, the system will not set unless the final door is locked

or an exit terminator button is pressed.

INSTANT SETTING

In certain circumstances, where an exit route is not required, your alarm

system may have been programmed at installation for ‘Instant Setting’.

Instant Setting applies only when the system is Part Set. Where Instant

Setting is programmed, the selected part of the system will set immediately

unless an alarm zone has been left open. (See Part Setting procedure.)

Enter access code. Press ‘A’. Sounder emits a

continuous tone. ‘A’ indicator

flashes during exit time and

remains on when set.

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

(a) (b)

Normal Setting

Final or Timed Setting

- -

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Scantronic 9800+ Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Scantronic 9800+