Scantronic 9800+ Bedienungsanleitung PDF herunterladen (Seite 9)

KEYSWITCH SETTING WITH ZONES OPEN

Should the user attempt to set the system with the keyswitch when one or

more zones are open, the system will not set. The internal sounder will emit

an interrupted tone and the LED display will indicate the open zone. Proceed

as follows:

(e) Turn the keyswitch on. If no other zones are open, the system will set.

Repeat step (d) if required.

Note: If a detector is fitted at the keypad or the final door is known to be

open, the appropriate LED will be displayed. The system will set when clear

of the detection. If the user is not clear by the end of the exit time an exit

fault will occur (internal sounder only).

Turn keyswitch off and close open

zone indicated on keypad.

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

Turn the keyswitch on. Sounder

emits intermittent tone.

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

(a) (b)

Keyswitch Setting (Cont.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Keine Kommentare

Scantronic 9800+ Bedienungsanleitung Seite 9