Scantronic 9800+ Betriebsanweisung PDF herunterladen (Seite 16)

16 496247 Issue 4

4. Special Functions

Table 1 (Cont'd) . Log Event Codes

Code Meaning

Lt Control unit lid tamper

o1 to o16



Zone omitted

P1 to P4 Remote keypad dual key PA alarm

PF Mains power failure

PL Print log.

r1 to r4 Remote keypad enclosure tamper

rP Remote keypad missing

rr Installer reset

rt Remote keypad excess key presses tamper

S1 to S16



Zone soak Test

Sr System reset

St Set time

t1 to t16



Zone tamper violation

tr Tamper return fault

u1 to u8 Access user (u9 = Duress, u0 = keys witch)



When showing zones 10 to 16 the display alternates between the letter 'c'

and the number of the zone.

Turning the Chime On/Off

Your system may be programmed so that a chime tone sounds whenever

certain doors are opened while the system is unset. If your system has an

Exit Terminate button, then it will act as a door bell while Chime is on. To turn

Chime on or off:

1. Key in your access code.

The display shows "_ _ "

2. Press 7 followed by y (Clear).

Testing the System

Bell Test

You can test that the internal and external sounders, and the strobe, are all

working as follows:

1. Key in your access code.

The display shows "_ _ "

2. Press 8.

The system turns the external sounder, strobe, internal sounder(s) and

keypad sounders on for three seconds each, one after the other.

3. Press y (Clear) to finish the test.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Scantronic 9800+ Betriebsanweisung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Scantronic 9800+