Scantronic 808 Installationshandbuch PDF herunterladen (Seite 19)

…always there

Input Switch Off On

1 Negative Applied Positive Applied

2 Disabled Enabled

3 Negative Applied Positive Applied

4 Disabled Enabled

5 Negative Applied Positive Applied

6 Disabled Enabled

7 Negative Applied Positive Applied

AC Fail

8 Disabled Enabled

Remote Programming

Once installed, the NVM can be re-programmed remotely by the ARC. Only

the relay states can be adjusted unless a technician is on-site to set the STU

into Secure Access Mode using LK3. Remote NVM programming is not

available on the 11zstu or on older units that do not have LK3 fitted.

Contact BT redcare for more information.

Manual Programming

NVMs can be programmed using a Scantronic 7200 or 7300 NVM

programmer.

Apply power to the programmer (12 V DC or 12 V AC.) and set the on/off

switch to position "0".

Insert the NVM in the socket marked ‘COPY NVM’. Ensure that the dot on

the NVM lines up with the white dot on the programmer.

Set the on/off switch to position ‘1’ and wait for the programmer to display

its version information and follow the instructions below:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Keine Kommentare

Scantronic 808 Installationshandbuch Seite 19