Scantronic 808 Betriebsanweisung PDF herunterladen (Seite 17)

496235 Issue 1 17

4. Special Functions

If you make a mistake, press C or D to move the cursor over the letter you

want to change, and key in the new letter. If you want to delete a name

completely, press D repeatedly to move the cursor under the extreme left

hand character of the name. Press D again. The display clears the old name.

To change a zone name:

1. Key in your access code.

2. Press Menu followed by 7.

The display shows: 7-ZONE NAMES

3. Press Enter.

The display shows: Z01-NAME

ZONE 01

The top line of the display shows the zone number.

The bottom line shows the current zone name. Note

that the cursor is under the zone number.

4. Press A or B until the display shows the zone

number you wish to name.

The display shows (for example): Z03-NAME

ZONE 03

5. Press Enter.

The display cursor moves to the first character

of the zone name (for example): ZONE 03

6. Key in the zone name as described at the beginning

of this subsection (see Figure 2).

7. Press Enter when you have completed the zone name.

The system saves the new name and moves the

cursor back to the zone number, for example: Z03-NAME

LOUNGE

8. EITHER repeat steps 4 to 7 for all the other zones you

want to name, OR press Menu twice to stop.

Using the Log (Menu 9)

The system keeps a log of the last 250 events. You can examine this log

from the keypad. If you have a printer attached to your system you can also

print the log. To use the log:

1. Key in your access code.

2. Press Menu followed by 9.

The display shows: 9-LOG FUNCTS

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Keine Kommentare

Scantronic 808 Betriebsanweisung Seite 17