Scantronic 808 Betriebsanweisung PDF herunterladen (Seite 5)

496235 Issue 1 5

Control Function Keys Your system may be fitted to control other devices

such external lighting. Press keys 7 and 9 together

to activate or deactivate the device. (Check with

your Installer that your system is programmed with

this function.)

Menu and Enter The Menu key lets you start programming the

system so that you can change some of its func-

tions (see 5. Supervisor). The Enter key tells the

system that you have finished entering an access

code (or other command).

About This Guide

The rest of this guide tells you how to use the system in more detail:

2. Everyday Operation Describes how to set and unset the system.

3. After an Alarm Tells you how to switch off the sounders after an

alarm, how to see what caused the alarm, and how

to reset the system so that it can be used again.

4. Special Functions Tells you how to use the more advanced features

of the system.

5. Supervisor Tells you how to control who has access to the

system, and how to limit what they can do. This

section is intended for someone who is responsible

for the whole alarm system.

1. Introduction

1 2 3 4 5 6 7 8 9 10 ... 25 26

Keine Kommentare

Scantronic 808 Betriebsanweisung Seite 5